Â¥Ö÷

WSDL Essentials WSDL is a specification defining how to describe web services in a common XML grammar. WSDL describes four critical pieces of data: •Interface information describing all publicly available functions •Data type information for all message requests and message responses •Binding information about the transport protocol to be used •Address information for locating the specified service In a nutshell, WSDL represents a contract between the service requestor and the service provider, in much the same way that a Java interface represents a contract between client code and the actual Java object. The crucial difference is that WSDL is platform- and language-independent and is used primarily (although not exclusively) to describe SOAP services. Using WSDL, a client can locate a web service and invoke any of its publicly available functions. With WSDL-aware tools, you can also automate this process, enabling applications to easily integrate new services with little or no manual code. WSDL therefore represents a cornerstone of the web service architecture, because it provides a common language for describing services and a platform for automatically integrating those services. This chapter covers all aspects of WSDL, including the following topics: •An overview of the WSDL specification, complete with detailed explanations of the major WSDL elements •Two basic WSDL examples to get you started •A brief survey of WSDL invocation tools, including the IBM Web Services Invocation Framework (WSIF), SOAP::Lite, and The Mind Electric's GLUE platform •A discussion of how to automatically generate WSDL files from existing SOAP services •An overview of using XML Schema types within WSDL, including the use of arrays and complex types 6.1 The WSDL Specification WSDL is an XML grammar for describing web services. The specification itself is divided into six major elements: definitions The definitions element must be the root element of all WSDL documents. It defines the name of the web service, declares multiple namespaces used throughout the remainder of the document, and contains all the service elements described here. Web Services Essentials 104 types The types element describes all the data types used between the client and server. WSDL is not tied exclusively to a specific typing system, but it uses the W3C XML Schema specification as its default choice. If the service uses only XML Schema built-in simple types, such as strings and integers, the types element is not required. A full discussion of the types element and XML Schema is deferred to the end of the chapter. message The message element describes a one-way message, whether it is a single message request or a single message response. It defines the name of the message and contains zero or more message part elements, which can refer to message parameters or message return values. portType The portType element combines multiple message elements to form a complete oneway or round-trip operation. For example, a portType can combine one request and one response message into a single request/response operation, most commonly used in SOAP services. Note that a portType can (and frequently does) define multiple operations. binding The binding element describes the concrete specifics of how the service will be implemented on the wire. WSDL includes built-in extensions for defining SOAP services, and SOAP-specific information therefore goes here. service The service element defines the address for invoking the specified service. Most commonly, this includes a URL for invoking the SOAP service. To help you keep the meaning of each element clear, Figure 6-1 offers a concise representation of the WSDL specification. As you continue reading the remainder of the chapter, you may wish to refer back to this diagram. Figure 6-1. The WSDL specification in a nutshell Web Services Essentials 105 In addition to the six major elements, the WSDL specification also defines the following utility elements: documentation The documentation element is used to provide human-readable documentation and can be included inside any other WSDL element. import The import element is used to import other WSDL documents or XML Schemas. This enables more modular WSDL documents. For example, two WSDL documents can import the same basic elements and yet include their own service elements to make the same service available at two physical addresses. Note, however, that not all WSDL tools support the import functionality as of yet. WSDL is not an official recommendation of the W3C and, as such, has no official status within the W3C. WSDL Version 1.1 was submitted to the W3C in March 2001. Original submitters included IBM, Microsoft, Ariba, and a half dozen other companies. Most probably, WSDL will be placed under the consideration of the new W3C Web Services Activity's Web Services Description Working Group, which will decide if the specification advances to an official recommendation status. The WSDL Version 1.1 specification is available online at http://www.w3.org/TR/wsdl. 6.2 Basic WSDL Example: HelloService.wsdl To make the previously described WSDL concepts as concrete as possible, let's examine our first sample WSDL file. Example 6-1 provides a sample HelloService.wsdl document. The document describes the HelloService from Chapter 4. As you may recall, the service provides a single publicly available function, called sayHello. The function expects a single string parameter, and returns a single string greeting. For example, if you pass the parameter world , the service returns the greeting, "Hello, world!" Example 6-1. HelloService.wsdl <?xml version="1.0" encoding="UTF-8"?> <definitions name="HelloService" targetNamespace="http://www.ecerami.com/wsdl/HelloService.wsdl" xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tns="http://www.ecerami.com/wsdl/HelloService.wsdl" xmlns:xsd="http://www.w3.org/2001/XMLSchema"> <message name="SayHelloRequest"> <part name="firstName" type="xsd:string"/> </message> Web Services Essentials 106 <message name="SayHelloResponse"> <part name="greeting" type="xsd:string"/> </message> <portType name="Hello_PortType"> <operation name="sayHello"> <input message="tns:SayHelloRequest"/> <output message="tns:SayHelloResponse"/> </operation> </portType> <binding name="Hello_Binding" type="tns:Hello_PortType"> <soap:binding style="rpc" transport="http://schemas.xmlsoap.org/soap/http"/> <operation name="sayHello"> <soap:operation soapAction="sayHello"/> <input> <soap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="urn:examples:helloservice" use="encoded"/> </input> <output> <soap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="urn:examples:helloservice" use="encoded"/> </output> </operation> </binding> <service name="Hello_Service"> <documentation>WSDL File for HelloService</documentation> <port binding="tns:Hello_Binding" name="Hello_Port"> <soap:address location="http://localhost:8080/soap/servlet/rpcrouter"/> </port> </service> </definitions> The WSDL elements are discussed in the next section of this chapter. As you examine each element in detail, you may want to refer to Figure 6-2 , which summarizes the most important aspects of Example 6-1. Figure 6-2. A bird's-eye view of HelloService.wsdl Web Services Essentials 107 6.2.1 definitions The definitions element specifies that this document is the HelloService. It also specifies numerous namespaces that will be used throughout the remainder of the document: <definitions name="HelloService" targetNamespace="http://www.ecerami.com/wsdl/HelloService.wsdl" xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tns="http://www.ecerami.com/wsdl/HelloService.wsdl" xmlns:xsd="http://www.w3.org/2001/XMLSchema"> The use of namespaces is important for differentiating elements, and it enables the document to reference multiple external specifications, including the WSDL specification, the SOAP specification, and the XML Schema specification. The definitions element also specifies a targetNamespace attribute. The targetNamespace is a convention of XML Schema that enables the WSDL document to refer to itself. In Example 6-1, we specified a targetNamespace of http://www.ecerami.com/wsdl/ HelloService.wsdl. Note, however, that the namespace specification does not require that the document actually exist at this location; the important point is that you specify a value that is unique, different from all other namespaces that are defined. Finally, the definitions element specifies a default namespace: xmlns=http://schemas.xmlsoap.org/wsdl/. All elements without a namespace prefix, such as message or portType , are therefore assumed to be part of the default WSDL namespace. 6.2.2 message Two message elements are defined. The first represents a request message, SayHelloRequest, and the second represents a response message, SayHelloResponse: <message name="SayHelloRequest"> <part name="firstName" type="xsd:string"/> </message> <message name="SayHelloResponse"> <part name="greeting" type="xsd:string"/> </message> Each of these messages contains a single part element. For the request, the part specifies the function parameters; in this case, we specify a single firstName parameter. For the response, the part specifies the function return values; in this case, we specify a single greeting return value. The part element's type attribute specifies an XML Schema data type. The value of the type attribute must be specified as an XML Schema QName - this means that the value of the attribute must be namespace-qualified. For example, the firstName type attribute is set to xsd:string ; the xsd prefix references the namespace for XML Schema, defined earlier within the definitions element. If the function expects multiple arguments or returns multiple values, you can specify multiple part elements. Web Services Essentials 108 6.2.3 portType The portType element defines a single operation, called sayHello. The operation itself consists of a single input message (SayHelloRequest) and a single output message (SayHelloResponse): <portType name="Hello_PortType"> <operation name="sayHello"> <input message="tns:SayHelloRequest"/> <output message="tns:SayHelloResponse"/> </operation> </portType> Much like the type attribute defined earlier, the message attribute must be specified as an XML Schema QName. This means that the value of the attribute must be namespacequalified. For example, the input element specifies a message attribute of tns:SayHelloRequest ; the tns prefix references the targetNamespace defined earlier within the definitions element. WSDL supports four basic patterns of operation: One-way The service receives a message. The operation therefore has a single input element. Request-response The service receives a message and sends a response. The operation therefore has one input element, followed by one output element (illustrated previously in Example 6-1). To encapsulate errors, an optional fault element can also be specified. Solicit-response The service sends a message and receives a response. The operation therefore has one output element, followed by one input element. To encapsulate errors, an optional fault element can also be specified. Notification The service sends a message. The operation therefore has a single output element. These patterns of operation are also shown in Figure 6-3. The request-response pattern is most commonly used in SOAP services. Web Services Essentials 109 Figure 6-3. Operation patterns supported by WSDL 1.1 6.2.4 binding The binding element provides specific details on how a portType operation will actually be transmitted over the wire. Bindings can be made available via multiple transports, including HTTP GET, HTTP POST, or SOAP. In fact, you can specify multiple bindings for a single portType. The binding element itself specifies name and type attributes: <binding name="Hello_Binding" type="tns:Hello_PortType"> The type attribute references the portType defined earlier in the document. In our case, the binding element therefore references tns:Hello_PortType , defined earlier in the document. The binding element is therefore saying, "I will provide specific details on how the sayHello operation will be transported over the Internet." 6.2.4.1 SOAP binding WSDL 1.1 includes built-in extensions for SOAP 1.1. This enables you to specify SOAPspecific details, including SOAP headers, SOAP encoding styles, and the SOAPAction HTTP header. The SOAP extension elements include: soap:binding This element indicates that the binding will be made available via SOAP. The style attribute indicates the overall style of the SOAP message format. A style value of rpc specifies an RPC format. This means that the body of the SOAP request will include a wrapper XML element indicating the function name. Function parameters Web Services Essentials 110 are then embedded inside the wrapper element. Likewise, the body of the SOAP response will include a wrapper XML element that mirrors the function request. Return values are then embedded inside the response wrapper element. A style value of document specifies an XML document call format. This means that the request and response messages will consist simply of XML documents. The document style is flatter than the rpc style and does not require the use of wrapper elements. (See the upcoming note for additional details.) The transport attribute indicates the transport of the SOAP messages. The value http://schemas.xmlsoap.org/soap/http indicates the SOAP HTTP transport, whereas http://schemas.xmlsoap.org/soap/smtp indicates the SOAP SMTP transport. soap:operation This element indicates the binding of a specific operation to a specific SOAP implementation. The soapAction attribute specifies that the SOAPAction HTTP header be used for identifying the service. (See Chapter 3 for details on the SOAPAction header.) soap:body This element enables you to specify the details of the input and output messages. In the case of HelloWorld, the body element specifies the SOAP encoding style and the namespace URN associated with the specified service. The choice between the rpc style and the document style is controversial. The topic has been hotly debated on the WSDL newsgroup (http://groups.yahoo.com/group/wsdl). The debate is further complicated because not all WSDL-aware tools even differentiate between the two styles. Because the rpc style is more in line with the SOAP examples from previous chapters, I have chosen to stick with the rpc style for all the examples within this chapter. Note, however, that most Microsoft .NET WSDL files use the document style. 6.2.5 service The service element specifies the location of the service. Because this is a SOAP service, we use the soap:address element, and specify the local host address for the Apache SOAP rpcrouter servlet: http://localhost:8080/soap/servlet/rpcrouter. Note that the service element includes a documentation element to provide human-readable documentation.    Êղؠ  ·ÖÏí   ¶¥(0)

	µÚ2Â¥

thanks